Pilbara Railways Image Collection

The entire photo collection of images scanned from negatives and slides and digital images.

Home

Last uploads

Last comments

Most viewed

267-06395 viewsGoldsworthy Junction, BHP's 1230 empty departure behind General Electric AC6000 unit 6076 'Mt Goldsworthy' serial number 51068 leads CM40-8MEFI 5669 on the point with mid-train units CM40-8M units 5651 and 5645 104 waggons back with 104 waggons trailing. 1247 hrs 12th of April 2002.

120512 IMG P10175395 viewsWest Kalgoorlie, PTLY type gas tank waggon PTLY 6416. Built by Comeng NSW in 1985 as NTHF type NTHF 416, 76,000 litre gas tank for Boral Gas, recoded to ATLY in 1996, and ATLY type gas tank waggon ATLY 1, built by Comeng NSW in 1968 as a Tg type tank waggon for Boral Gas as Tg 1 on the South Australian Railways, to the VR as TWF type TWF 10 in 1979, then later in 1979 to VTGX type. Off VR register 1988 and to AN as ATLX type ATLX 1, then to ATLY. Peter Donaghy image.

121202 IMG P11608395 viewsWest Kalgoorlie, NTAY 6127 fuel tank waggon, built by Industrial Engineering Qld in 1976 as an SCA type SCA 278 for Shell. Recoded to NTAF 278, then 6127, capacity of 61,300 litres. Peter Donaghy image.

130429 IMG P12867395 viewsWest Kalgoorlie, AZKY type anhydrous ammonia tank waggon AZKY 32231, type leader of twelve units built by Goninan WA in 1998 as type WQK for Murrin Murrin traffic fitted with Bis INDUSTRIES anhydrous ammonia tank A1K. Peter Donaghy image.

140309 IMG 1760395 viewsWest Kalgoorlie, ATLY type gas tank waggon ATLY 1, built by Comeng NSW in 1968 as a Tg type tank waggon for Boral Gas as Tg 1 on the South Australian Railways, to the VR as TWF type TWF 10 in 1979, then later in 1979 to VTGX type. Off VR register 1988 and to AN as ATLX type ATLX 1, then to ATLY. Peter Donaghy image.

140406 IMG 1940395 viewsWest Kalgoorlie, NTBF 6119 fuel tank waggon, originally built by Comeng NSW in 1975 as SCA type SCA 270 a 69,000 litre bitumen tank waggon for Shell NSW, diesel capacity of 62,700 litres. Peter Donaghy image.

140409 IMG 1957395 viewsWest Kalgoorlie, NTBF 6122 fuel tank waggon, built by Comeng NSW 1975 as a bitumen tanker type SCA for Shell Bitumen NSW as SCA 273. Peter Donaghy image.

190109 1450395 viewsWest Kalgoorlie, ATLF 562 tank waggon, built by WAGR Midland Workshops 1973 for Shell as type WJL 86.49 kL one compartment one dome with a capacity of 80500 litres, fitted with type F InterLock couplers. Under Viva Energy ownership.

160409 IMG 7013395 viewsParkeston, Aurizon rail grinder MMY type MMY 034, built in the USA by Loram as RG331 ~2004, imported into Australia by Queensland Rail, now Aurizon, in April 2009, detail picture. Peter Donaghy image.

160412 IMG 7362395 viewsParkeston, Aurizon rail grinder MMY type MMY 034, built in the USA by Loram as RG331 ~2004, imported into Australia by Queensland Rail, now Aurizon, in April 2009, detail picture. Peter Donaghy image.

283-27395 viewsHarding Siding, quad Robe River CM40-8M units 9414, 9420, 9410 and 9425 lead their 202 loaded ore waggons through the passing track at Siding 1 (Harding) following recent extension of the loop and renaming to Harding. The extension is at the north end to accommodate the new West Angelas trains of up to 240 waggons. Wednesday 22nd May 2002.

210407 9867395 viewsParkeston, 2MP5 intermodal train, CQWY type well waggon 5044 well 2 with a RAND Refrigerated Logistics 46' 6" MFR3 type reefer container RAND 366. The CQWY well waggon pairs were built by Bluebird Rail Operations SA in a batch of sixty pairs in 2008 for CFCLA.

9081 Comeng 110620 2019395 viewsWalla Siding, empty BHP ore waggon 9081, renumbered from 2710, originally built in 1971 by Comeng WA as part of a batch of four hundred waggons. The renumbering would be due to a new waggon replacing a potential scrap waggon, which then has been returned to service. June 20, 2011.

9020 Comeng 030712 142923395 viewsNelson Point, empty BHP ore waggon 9020, the prototype leader originally built by Comeng in Mittagong NSW as a part of seven prototype ore waggons made from low carbon 301 stainless steel with an higher volume and aerodynamic flat sides and were bogieless with four independent radial wheel sets. Of the seven waggon, the first four had a flat floor and final three had a drop belly floor. The radial wheel sets were later replaced with conventional bogies. July 12, 2003.

231020 8228395 viewsParkeston, QQYY type 40' container waggon QQYY 57960 one of five hundred ordered by Aurizon and built by CRRC Yangtze Group of China in 2022. In service with two loaded 20' half height hard top 'rotainers' lettered CRM, for Cristal Mining before they were absorbed into Tronox, CRM 001750 with Tronox decal and yellow corner posts and CRM 001388 with Tronox decal and yellow corner posts, on Aurizon's Tronox mineral sands train 4UP1 from Ivanhoe / Broken Hill (NSW) to Kwinana (WA). 20th of October 2023.

100603 8999395 viewsParkeston, SCT train 3MP9, PQIY type 80' container flat PQIY 0035, one of forty units built by Gemco WA in 2009 loaded with 40' K+S Freighters GPR1 type reefer RWRU 0011 and 40' SCT Logistics GPR1 type reefer SCTU 06 / CR021.

240701 2727395 viewsPilbara Railways Historical Society, passenger carriage 'Conference Car' originally built by Clyde Engineering at Granville NSW in 1935 for the NSWGR as a second class railway carriage FS type FS 2010. In 1975 it was purchased by Hamersley Iron and converted to an inspection vehicle SV 4. When donated to the Society it was repurposed as a conference car. July1, 2024.

240701 2753395 viewsPilbara Railways Historical Society, passenger carriage 'Conference Car' originally built by Clyde Engineering at Granville NSW in 1935 for the NSWGR as a second class railway carriage FS type FS 2010. In 1975 it was purchased by Hamersley Iron and converted to an inspection vehicle SV 4. When donated to the Society it was repurposed as a conference car. July1, 2024.

240701 2740395 viewsPilbara Railways Historical Society, view along the passenger carriages behind rebuilt ALCo C636R locomotive 3017 with the first passenger carriage 'Bellary' was originally built by Clyde Engineering at Granville NSW in 1936 for the NSWGR as a second class railway carriage FS type FS 2143. In 1987 it was purchased by the Society and is named after a local river. The next carriage is van 'Portland' and originally an NSWGR MHO type guards van MHO 2321, then recoded to KB type mail van, then to KBY 2513 guards van. For a view 20 years ago, click here. July 1, 2024.

284-21395 viewsNarngulu, Geraldton, former Westrail P class loco P 2004 'Shire of Dalwallinu' built by Goninan WA as a GE CM25-8 model with serial number 6320-12 / 90-099 sits in the yard on empty mineral sand train waiting to run to Eneabba. November 9, 2004.

19220 files on 961 page(s)