Most viewed |

051103 6702442 viewsSpencer Junction yard, ECA 162 built by Comeng NSW in 1964 for Commonwealth Railways as a BRE type second class, air conditioned, twin berth staggered corridor steel sleeping car BRE 162. Converted to ECA type crew car in 1991. Seen here under GWA ownership on loan to Pacific National and in use on East-West freighters. Finally it was scrapped at Dry Creek in December 2014.
|
|

161109 1912442 viewsMoule, originally built by Kinki Sharyo as the NH type for the NAR in 1968, sent to Port Lincoln in 1978, then rebuilt and recoded ENH type in 1984, ENH 4 with heavy patching of body, new end plates and new hungry boards loaded with gypsum.
|
|

161111 2494442 viewsBinduli, Kalgoorlie Freighter train 5025, waggon AQRY 1011 platform A with two 20' 22G1 type boxes, a TAL TCLU 724006[4] and Triton TCKU 233940[0]. The AQRY are a bar-coupled pair and were used for rail transport as the AFRF type on the Darwin line and are originally former ANR-CR waggons.
|
|

161111 2524442 viewsBinduli, Kalgoorlie Freighter train 5025, waggon AQHY 30082 with sulphuric acid tank CSA 0112, originally built by the WAGR Midland Workshops in 1964/66 as a WF type flat waggon, then in 1997, following several recodes and modifications, was one of seventy five waggons converted to the WQH type to carry CSA sulphuric acid tanks between Hampton/Kalgoorlie and Perth/Kwinana.
|
|

0001 Comeng NSW 050414 0943442 viewsFlash Butt yard, Comeng NSW built 82 kilolitre water tank waggon 0001, one of two such tank waggons built in November 1970.
|
|

CHQY 734 050518 2096442 viewsFlash Butt yard, CFCLA hire ballast waggon CHQY type CHQY 734.
|
|

0538 Mt Newman Mining Workshops 051001 5639442 viewsFlash Butt yard, side view of ballast plough converted from Magor USA built Oroville ore waggon 538, still visible is the ODCX 82160 number from original service building the Oroville Dam.
|
|

6012 Scotts of Ipswich Qld 051001 5698442 viewsBoodarie, the Steel Train or rail recovery and transport train, flat waggon #18, 6012, a Scotts of Ipswich Qld built flat waggon from September 1970.
|
|

6206 Comeng WA 050522 2725442 viewsGoldsworthy Junction, rail recovery and transport train flat waggon #15, 6206 built by Comeng WA in January 1977 under order number 07-M-282 RY.
|
|

6009 Scotts of Ipswich Qld 050522 2726442 viewsGoldsworthy Junction, rail recovery and transport train flat waggon #16, 6009 built by Scotts of Ipswich Qld in September 1970.
|
|

6005 Scotts of Ipswich Qld 050522 2734442 viewsGoldsworthy Junction, rail recovery and transport train flat waggon #24, 6005 with registered number G506007, built by Scotts of Ipswich Qld in 1970.
|
|

0522 Mt Newman Mining Workshops 060414 3440442 viewsNelson Point yard, weighbridge test waggon 522, originally built by Magor USA and ex Oroville Dam, converted by Mt Newman Mining into a 20 ton axle load test waggon. The others in the fleet are 40, 60 and 100 tons. April 14, 2006.
|
|

6017 Comeng WA 060429 3733442 viewsFlash Butt yard, Pony waggon 6017, built by Comeng WA in 1971 in a batch of three numbered 6014-6017, view of asset number 6506-017.
|
|

050411 0601442 viewsGoldsworthy Junction, BHP track machine ballast regulator BR 31 a Plasser Australia SSP 110SW model with serial 401 comes off the former Goldsworthy line with the Newman mainline in the foreground. 11th April 2005.
|
|

050625 3820442 viewsNode 2 at the 38 km on the GML or former Goldsworthy mainline, some Barclay Mowlem track machines are off clear of the running lines, a sleeper crane is at the front with three sleeper inserters behind. 25th June 2005.
|
|

030404 103651442 viewsPort Augusta Spencer Junction yard, National Rail Goninan built GE Cv40-9i model NR class unit NR 50 serial 7250-08 / 97-252 lay about the yard in between jobs. 4th April 2003.
|
|

030416 084242442 viewsCarnes Siding located at the 566.4 km on the Central Australian line from Tarcoola to Alice Springs. View looking south from the north end of the goods siding rejoining the loop and the mainline at right. The train control 'pillbox' concrete hut is visible with the station nameboard the white item beside it. GeoData location. 16th April 2003.
|
|

171121 0971442 viewsBarker Siding, Loram rail grinder MPC 2, this was sent out from the USA where it was operational as LMIX 602 for Loram. The generator and driving cab look to be fitted to an 85 foot piggy back waggon. 21st November 2017.
|
|

242-15442 viewsNelson Point, Loco Overhaul Shop, General Electric built AC6000 locomotive 6076 'Mt Goldsworthy' serial 51068 with engine and alternator removed. May 2002.
|
|

180615 1574442 viewsWalla Siding, BHP took delivery of two new ballast ploughs in December 2017. They were built by CRRC Yangtze China in 2017 and weigh in at 65 tonnes. The ploughs are numbered BP 01 and BP 02. We finally caught up with them top and tail on a ballast consist, here's BP 02.
Roland Depth photo.
|
|
| 19220 files on 961 page(s) |
 |
 |
 |
 |
 |
 |
 |
 |
494 |  |
 |
 |
 |
 |
 |
 |
|