 Last additions - Pilbara negative and digital Albums - Iron Ore |
251-32480 viewsNelson Point, the final ALCo on the BHP roster, 5499 sits stored pending its future. Built by Comeng NSW in November 1975 as an ALCo M636 with serial number C6096-04. The unit was intended to be donated to Thursday Island, but this didn't eventuate due to logistical reasons. It is now at the Rail Heritage WA museum in Bassendean. 22nd April 2000.Nov 12, 2020
|
|
251-311987 viewsNelson Point, the final ALCo on the BHP roster, 5499 sits stored pending its future. Built by Comeng NSW in November 1975 as an ALCo M636 with serial number C6096-04. The unit was intended to be donated to Thursday Island, but this didn't eventuate due to logistical reasons. It is now at the Rail Heritage WA museum in Bassendean. 22nd April 2000.Nov 12, 2020
|
|
251-30492 viewsNelson Point hard stand area overview sees the CM39-8 model loco 5631, an unidentified flat car and some ore waggons and a compressor set in the distance. 22nd April 2000.Nov 12, 2020
|
|
251-29519 viewsNelson Point hard stand area has the compressor waggon 559 off compressor waggon set No. 6 and two ballast waggons 534 and 536. All three waggons are modified from the original Oroville Dam ore waggons built by Magor USA. 22nd April 2000.Nov 12, 2020
|
|
251-28345 viewsNelson Point hard stand area, drivers side profile view of BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-27361 viewsNelson Point hard stand area, drivers side cab view of BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-26369 viewsNelson Point hard stand area, view of the pilot and newly installed Leslie 5 chime horn, the original single horn can be seen below it. BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-25379 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-24370 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-23386 viewsNelson Point hard stand area, BHP's 5631 'Apollo' built new in October 1988 by Goninan as a GE CM39-8 model with serial number 5831-10 / 88-080. One of four such units built in 1988 and delivered in the Mt Newman orange livery. 22nd April 2000.Nov 12, 2020
|
|
251-22378 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-21383 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-20359 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-19378 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-18395 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 and yet to be named idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-17407 viewsNelson Point wheel lathe, BHP's General Electric built AC6000 model 6074 serial 51066 idles away outside the shop. 22nd April 2000.Nov 12, 2020
|
|
251-16404 viewsNelson Point, the South Yard 'prep shed' located on the dumper exit roads 102, 103 and, 104. Goninan GE rebuild unit 5656 a CM40-8M unit with serial number 8412-01 / 94-147 sits on shed with a sister units. This facility was used to service and fuel locomotives while their respective waggon rakes were being tipped through the car dumpers. 22nd April 2000.Nov 12, 2020
|
|
251-15425 viewsNelson Point, the South Yard 'prep shed' located on the dumper exit roads 102, 103 and, 104. This facility was used to service and fuel locomotives while their respective waggon rakes were being tipped through the car dumpers. 22nd April 2000.Nov 12, 2020
|
|
251-14388 viewsNelson Point, BHP's retired Goninan WA's ALCo C636 to GE C36-7M rebuilds, these were the first time in the world that an ALCo C636 had been rebuilt into an GE C36-7, are lined up near the service shop awaiting their fate. The line is 5510, 5506, 5508, 5512, 5513, 5507, 5509, 5511, and, 5513. They had recently been displaced due to the arrival of the AC6000 units which also took their name plates. Only two units would go on to survive 5507 and 5508. 22nd April 2000.Nov 12, 2020
|
|
251-13368 viewsNelson Point, BHP's recently retired Goninan WA ALCo C636 to GE C36-7M rebuild unit 5513 serial number plate. 22nd April 2000.Nov 12, 2020
|
|
| 6220 files on 311 page(s) |
 |
|
|
|
|
|
|
|
154 | |
|
|
|
|
|
|
|
Login
